多槽手動超聲波清洗機的超聲波清洗技術在汽車發動機氣缸體及零部件清洗中的超聲波應用，與傳統清洗方式相比，超聲波清洗有如下優點：

Compared to traditional cleaning methods, ultrasonic cleaning has the following advantages:

1．清洗更徹底

1. More thorough cleaning

超聲波清洗技術的超聲波原理表明該種方式非常適合清洗發動機氣缸體、氣缸蓋類形狀複雜的構件。這類零部件若用人工清洗，有很多部位是難以或無法清洗到的，使用工具也無法取得良好的清洗效果。清洗劑隻能溶解部分汙垢，對於頑固汙垢及零件內部的汙垢也是力不從心。超聲波技術清洗是一種奇妙的物理清洗方法，猶如無數小刷子同時清洗物體的內外表麵，因此可以使傳統方法無法完成的內表麵及內孔的清洗一次完成。

The ultrasonic principle of ultrasonic cleaning technology indicates that this method is very suitable for cleaning complex shaped components such as engine cylinder blocks and cylinder heads. If such parts are manually cleaned, many parts are difficult or impossible to clean, and the use of tools cannot achieve good cleaning results. Cleaning agents can only dissolve part of the dirt, and are also inadequate for stubborn dirt and dirt inside parts. Ultrasonic technology cleaning is a wonderful physical cleaning method, like countless small brushes simultaneously cleaning the internal and external surfaces of objects. Therefore, it can complete the cleaning of internal surfaces and holes that cannot be completed by traditional methods at one time.

2．操作安全、節約能源

2. Safe operation and energy saving

小型零部件的清洗目前多使用汽油或柴油刷洗，因此操作安全係數很低，易造成事故。而超聲波技術清洗使用水基清洗劑，無事故隱患。

Currently, gasoline or diesel oil is commonly used for cleaning small components, resulting in a low operating safety factor and easy to cause accidents. Ultrasonic technology uses water-based cleaning agents for cleaning, without potential accidents.

3．工作效率高

3. High work efficiency

隻需將零部件解體後放在清洗機的絲網料筐中並按一下開關即可，在清洗過程中，維修人員可以做其他工作。

Simply disassemble the parts and place them in the wire mesh basket of the cleaning machine and press the switch once. During the cleaning process, maintenance personnel can do other work.

4．清洗成本低

4. Low cleaning cost

因清洗劑重複使用率高，耗材采購廉價，故清洗成本一般隻有傳統清洗方法的1／3至1／8。

Due to the high reuse rate of cleaning agents and the cheap procurement of consumables, the cleaning cost is generally only 1/3 to 1/8 of that of traditional cleaning methods.

此外要注意，超聲波清洗機不適用於油漆，壓電陶瓷切片，軟材料。它可用於電子零件，電鍍，硬件，時鍾，帶子，工具，光學鏡頭，珠寶，鏡頭，眼鏡框架，半通道晶圓，噴絲頭過濾器和玻璃器皿，手機零件，汽車維護等。更多的相關事項了解就來91污網站http://www.ahfanglei.com谘詢！

In addition, it should be noted that ultrasonic cleaning machines are not suitable for paints, piezoelectric ceramic chips, and soft materials. It can be used for electronic parts, electroplating, hardware, clocks, belts, tools, optical lenses, jewelry, lenses, eyeglass frames, half channel wafers, spinneret filters and glassware, mobiles phones parts, car maintenance, etc. For more information on related matters, please visit our website http://www.ahfanglei.com consulting service