鍵盤，是電腦族每天都在應用的一個打字小工具，但由於長時間的應用，會導致鍵盤內存儲著較多的汙漬，那就需要對鍵盤進行清洗了。簡單的使用濕紙巾對鍵盤進行擦洗隻能將其表麵清洗幹淨，其內部還是會存在很多汙漬的，那這時該怎麽辦呢？其實是可以借用超聲波清洗機洗鍵盤的。

Keyboard is a small typing tool used by the computer family every day. However, due to the long-term application, there are many stains in the keyboard memory, so it is necessary to clean the keyboard. Simple use of wet tissue to scrub the keyboard can only clean its surface, there will still be a lot of stains inside, then how to do? In fact, you can use the ultrasonic cleaning machine to wash the keyboard.

超聲波清洗機設備是如何清洗鍵盤的：

How does the ultrasonic cleaning machine clean the keyboard

1、對鍵盤進行拆卸

1. Remove the keyboard

在應用超聲波清洗機設備對鍵盤進行清洗之前，務必要先卸下鍵盤的零件。由於鍵盤的部分零件無法進行清洗，需要將其拆下。

Before using the ultrasonic cleaning machine to clean the keyboard, be sure to remove the keyboard parts first. Because some parts of the keyboard cannot be cleaned, it needs to be removed.

2、鍵盤的清洗

2. Keyboard cleaning

把拆裝出來的電腦鍵盤裏能夠清洗的一部分輕輕地放進超聲波清洗機儀器的清洗箱中，由於電腦鍵盤表麵沒有過多的油漬，因此清潔劑是能夠應用冷水的，以便做到更強的清洗實際效果，可以添加適量的洗滌液。待儲水箱放滿冷水後，輕輕地起動清洗機設備的開關開始進行鍵盤的清洗。

Put the part that can be cleaned in the disassembled computer keyboard gently into the cleaning box of the ultrasonic cleaning machine. Since there is not too much oil on the surface of the computer keyboard, the cleaner can be cold water, so as to achieve stronger actual cleaning effect, and add an appropriate amount of detergent. After the water storage tank is filled with cold water, gently start the switch of the cleaning machine to clean the keyboard.

3、風幹後對鍵盤重新組裝

3. Reassemble the keyboard after air drying

待鍵盤從超聲波清洗機儀器的清洗箱中取出後，需要先用清水衝洗衝洗。在衝洗後，可將其放在幹燥通風的地方風幹或吹幹，在確認鍵盤幹燥後，可以按照拆卸的過程重新對鍵盤進行組裝。

After the keyboard is removed from the cleaning box of the ultrasonic cleaning machine, it needs to be washed with clean water. After washing, it can be put in a dry and ventilated place for air drying or blow drying. After confirming that the keyboard is dry, the keyboard can be reassembled according to the disassembly process.

當在應用超聲波清洗機設備對鍵盤進行清洗時務必要將鍵盤的可清洗構件與不可以清洗的構件進行分離，因為鍵盤內部有些零件是不能夠進行清洗的，若是清洗，很容易導致鍵盤的無法再次使用。

When using the ultrasonic cleaning machine to clean the keyboard, it is necessary to separate the components that can be cleaned from the components that can not be cleaned, because some parts inside the keyboard can not be cleaned. If it is cleaned, it is easy to cause the keyboard can not be used again.