超聲波功率就是其中的一種決定性因素。比如說，當超聲功率比較強的時候，清洗時間不用多久就可以洗幹淨了，如果是清洗眼鏡、項鏈、手鏈、黃金鉑金首飾、珠寶首飾等等一些家用型的小物件，清洗對象是灰塵、油漬等汙垢，那一般3-5分鍾就可以了。但如果清洗的物件比較大，且汙垢比較厚重的話，那就不止了。一般在工廠工業中的清洗是15-30分鍾即可。當超聲波功率過於弱的時候，就不是清洗時間長與短的問題了，很有可能就洗不幹淨了。

Ultrasonic power is one of the decisive factors. For example, when the ultrasonic power is relatively strong, the cleaning time will not take long to clean. If it is cleaning glasses, necklaces, bracelets, gold and platinum jewelry, jewelry and other small household items, and the cleaning object is dirt such as dust and oil stains, it will take 3-5 minutes. But if the cleaning object is large and the dirt is heavy, it will be more than that. Generally in the factory industry cleaning is 15-30 minutes. When the ultrasonic power is too weak, it is not the problem of long and short cleaning time, and it is likely that it will not be cleaned.

另外超聲波頻率也是決定清洗效果的一種因素，一般市麵上的28KHz-128KHz之間的超聲波清洗設備主要是用在清洗流水線上，這個清洗時間又得看清洗工序有幾個，如果選擇全自動超聲波清洗機來進行整個清洗工序，那也是一個長期可行的辦法，這樣絕對是比人工清洗的效率更高，清洗潔淨程度也相對會更幹淨。

In addition, the ultrasonic frequency is also a factor that determines the cleaning effect. Generally, the ultrasonic cleaning equipment between 28kHz and 128khz on the market is mainly used in the cleaning line. The cleaning time depends on the number of cleaning processes. If you choose the automatic ultrasonic cleaning machine to carry out the whole cleaning process, it is also a long-term feasible method, This is definitely more efficient than manual cleaning, and the cleaning degree will be relatively cleaner.

而40KHz以下的換能器主要用於五金類、金屬類的一些零配件，比較廣泛的被應用於鐵道行業、航天航空、輪船、汽車等行業，這些行業零配件往往汙垢油脂比較厚重、外表比較粗糙，所以需要強度比較大的低頻換能器，清洗時間普遍是20-30分鍾左右。而一些精密光學零件都是采用高頻換能器，高頻的超聲波清洗機價格比低頻的價格是相對比較高的。像實驗室、醫學研究等場所，其清洗物件都比較精密細致，震動強度不宜太大，一般選擇40KHz或者更高頻率的超聲波清洗機，一般是5-30分鍾不等的清洗時間。

The transducers below 40KHz are mainly used for some hardware and metal parts, which are widely used in the railway industry, aerospace, ship, automobiles and other industries. In these industries, the parts are often heavy in dirt and grease, and the appearance is rough, so the low-frequency transducers with large strength are needed, and the cleaning time is generally about 20-30 minutes. And some precision optical parts are using high-frequency transducer, the price of high-frequency ultrasonic cleaning machine is relatively higher than that of low-frequency. Such as laboratories, medical research and other places, the cleaning objects are more precise and meticulous, and the vibration intensity should not be too large. Generally, the ultrasonic cleaning machine with 40KHz or higher frequency is selected, and the cleaning time is generally 5-30 minutes.

再者洗淨時間的長短還與清洗劑有關，對於一些化學汙垢，需要添加清洗劑來產生化學反應，從而達到徹底清洗，如果清洗劑選的不對，超聲波清洗機運作到報廢也洗不幹淨的。所以清洗不幹淨一般也不是超聲波清洗機的錯，畢竟超聲波清洗機起到的隻是物理上的清洗作用。

Moreover, the length of cleaning time is also related to the cleaning agent. For some chemical dirt, it is necessary to add cleaning agent to produce chemical reaction, so as to achieve thorough cleaning. If the cleaning agent is not selected correctly, the ultrasonic cleaning machine can not be cleaned even when it is scrapped. So cleaning is generally not the fault of ultrasonic cleaning machine, after all, ultrasonic cleaning machine only plays the role of physical cleaning.

清洗物件本身的汙垢厚重程度，厚重的一般會比汙垢淺的清洗時間長。不過清洗時間也並非是越長越好，如果清洗時間太長了，就要考慮考慮是不是清洗設備選擇錯了。

The dirt of the cleaning object itself is heavy, and the heavy one usually takes longer than the shallow one. However, the longer the cleaning time, the better. If the cleaning time is too long, it is necessary to consider whether the cleaning equipment is wrong.

本文來自：山東超聲波清洗機更多的內容請點擊：http://www.ahfanglei.com91污將會為您提問的問題提供一個滿意的服務，歡迎您的來電！

This article is from: Shandong ultrasonic cleaning machine. For more information, please click: http://www.ahfanglei.com We will provide a satisfactory service for your questions, welcome your call!