目前市場上的超聲波振蕩器主要用於大型水質淨化設備和各種超聲波清洗設備，在應用超聲波後廣泛應用於各種工業消耗、精細儀器清洗和家庭生活中，停止溶液攪拌，從而停止對所需項目的清洗和消毒。那麽，當我們停止對超聲波振子的日常維護時，應該注意哪些成果呢？

What should be paid attention to in the maintenance of ultrasonic oscillator in ultrasonic cleaning machine? At present, the ultrasonic oscillator on the market is mainly used for large-scale water purification equipment and various ultrasonic cleaning equipment. After the application of ultrasonic, it is widely used in various industrial consumption, fine instrument cleaning and family life. Stop the solution mixing, so as to stop the cleaning and disinfection of the required items. So, when we stop the routine maintenance of the ultrasonic vibrator, what results should we pay attention to?

一，側風口清潔。高評價的超聲波振蕩器在底部和側麵有一個特殊的噴口，以保證儀器任務中無效的散熱，因此超聲波振蕩器的側風口能否被清潔，排氣和熱排放是否被延遲，將間接影響整個儀器的清洗效果和工作安全性。頻繁工作的超聲波振蕩器應該每兩個月清洗一次。

1、 Clean the side air outlet. The highly evalsuated ultrasonic oscillator has a special nozzle at the bottom and side to ensure the ineffective heat dissipation in the instrument task. Therefore, whether the side outlet of the ultrasonic oscillator can be cleaned and whether the exhaust and heat emission can be delayed will indirectly affect the cleaning effect and work safety of the whole instrument. Frequent working ultrasonic oscillators should be cleaned every two months.

二，過熱維修。為了避免在任務中因過熱而損壞儀器部件，質量好的超聲波振蕩器將在儀器外麵安裝特殊的過熱維護和安裝，但如果操作人員發現在使用超聲波振蕩器的過程中出現異常加熱，還應及時關閉電源並對加熱原因進行反思，以免因過熱維護和安裝而對儀器造成損壞。

2、 Overheat repair. In order to avoid damage to the instrument components due to overheating during the task, a high-quality ultrasonic oscillator will be installed outside the instrument for special overheating maintenance and installation. However, if the operator finds abnormal heating in the process of using the ultrasonic oscillator, he should turn off the power in time and reflect on the heating reasons, so as to avoid damage to the instrument due to overheating maintenance and installation.

三，清洗劑清空。當使用超聲波振蕩器停止清洗物品時，大量的人會加入一定量的酸堿清洗劑以提高清洗效果，但清洗劑在打開很長一段時間後會釋放揮發性酸或堿性氣體，形成對儀器外部的腐蝕，因此超聲波振蕩器應在一次性使用後及時清空其外部儲存清洗劑。

3、 The cleaning agent is empty. When the ultrasonic oscillator is used to stop cleaning, a large number of people will add a certain amount of acid-base cleaning agent to improve the cleaning effect. However, after the cleaning agent is opened for a long time, it will release volatile acid or alkaline gas, forming corrosion to the outside of the instrument. Therefore, the ultrasonic oscillator should be emptied in time after one-time use.

總之，應注意側風口的電流停止清洗，注意儀器的過熱維護，停止超聲波振蕩器的日常維護時及時清空清洗劑。超聲波振蕩器具有良好的售後服務，具有更完善的清洗功能和較好的清洗效果。

In short, we should pay attention to the current of the side tuyere to stop cleaning, pay attention to the overheating maintenance of the instrument, and clear the cleaning agent in time when stopping the routine maintenance of the ultrasonic oscillator. Ultrasonic oscillator has good after-sales service, more perfect cleaning function and better cleaning effect.